| TH-D74A/E Virtual COM Port Driver | September 16, 2016 |
- Dpinst.exe 64 Bit Windows 8 Itunes Download
- Dpinst.exe 64 Bit Windows 8 Free Download
- Dpinst.exe 64 Bit Windows 8 1 download free. full Version
Helps if you tell us about your machine. Only very late model Macs run 64 bit and then you use the 64 bit Windows install DVD. For example my Mac Pro is 32 bit and must run 32 bit version of Windows 7 Ultimate. But you can use the DPInst from older WDK: wdksetup1511.exe. Use DIFx version 2.1, which is available in the Windows 7 WDK through the Windows 10 Version 1511 WDK. It works with Windows 10 build 1709. Edited by joerifeyen Friday, December 8, 2017 6:36 PM. Marked as answer by joerifeyen Friday, December 8, 2017 6:36 PM. A typical 64-bit driver package will contain the following files where FTD2XX64.dll and FTD2XX64.lib are 64-bit versions of the D2XX DLL and lib files respectively: dpinstpackagex64. In order to use DPInst to install the driver, DPInst.exe must be run. By doing this, the driver will be pre-installed on the PC. Dpinst.exe 64 bit windows 8. Aug 26, 2013 I found the answer in DPInst Localization Support. In the installation directory, look under redist DIFx dpinst, choose appropriate language and platform in subdirectory below. Improve this answer. Edited Aug 11 '15 at 8:04. Peter Mortensen. DPInst.exe is an executable file that is part of the AX88772A & AX88772 Vista 64-bit Driver program developed by ASIX Electronics Corporation. The software is usually about 970.55 KB in size. The.exe extension of a file name displays an executable file.
Introduction
Thank you for choosing the KENWOOD transceiver. You can connect your TH-D74A/E to a PC via a Micro-USB cable, and then utilize the Frequency Control Program or Memory Control Program we have provided.
After reading through the following explanations, feel free to download and install the software.
Operating Environment
1. Operating System (OS)
Windows® 7 (32-bit or 64-bit)
Windows® 8.1 (32-bit or 64-bit)
Windows® 10 (32-bit or 64-bit)
2. Peripheral Devices
USB 2.0 interface.
Installing the virtual COM port driver
ATTENTION: Do not connect the device to a PC before installing the virtual COM port driver.
1. Extract the downloaded file 'USB_CDC_Driver_TH-D74_V100.zip' into a designated folder. In the designated folder, a folder labeled 'USB_CDC_Driver_TH-D74_V100' will be created.
In the folder labeled 'USB_CDC_Driver_TH-D74_V100', double click the 'dpinst.exe' in the folder 'x86' with 32-bit OS, or the 'dpinst.exe' in the folder 'x64' with 64-bit OS.
After a few moments, the following window is displayed.
Click [Next>].
2. The following window is displayed, and the driver installation will begin.
Wait until the installation is completed.
Dpinst.exe 64 Bit Windows 8 Itunes Download
3. After a few moments, the following window is displayed.
Click [Finish] to complete installation and exit.
Connecting the device to a PC
Turn the transceiver power ON, then connect it to a PC via a Micro-USB cable for the transceiver. The PC will detect new hardware.
The installation of the device driver software will start automatically.
If a reboot request appears, please reboot the PC.
Confirming the COM port number
Open the 'Device Manager' to confirm which COM port number is assigned for connection with the TH-D74A/E.
(Confirm the COM port number after turning on the transceiver and connecting the transceiver to the PC using a Micro-USB cable.)
For Windows® 7
1. Click the Windows® [Start] button.
2. Right-click [Computer], then click [Properties].
3. Click [Device Manager] in the displayed window.
4. [Device Manager] window will appear.
For Windows® 8.1 and Windows® 10
1. Right-click the Windows® [Start] button.
2. Click [Device Manager] in the displayed window.
3. [Device Manager] window will appear.
Click 'Ports (COM & LPT)' to extend it, then you can find 'TH-D74 (COMxx)'. The 'COMxx' number is different depending on your PC.
In the above example, 'TH-D74 (COM3)' is listed. This means that COM3 is assigned for the connection with the TH-D74A/E.
Select this port number in the configurations for communication in the software you are using.
Dpinst.exe 64 Bit Windows 8 Free Download
If you agree with the details listed above, click the following link to download the virtual COM port driver installation program.
Dpinst.exe 64 Bit Windows 8 1 download free. full Version
Update History
First Release (September 16, 2016)
Windows®, and Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries.
Follow the instructions on this page for important jumper settings and firmware upgrade instructions.
Do not connect your CC3200 LaunchPad to your PC. If you already plugged it into your PC then unplug it before proceeding to step 2.
Download the CC3200 Drivers for Windows: CC3200 LaunchPad CDC drivers zip file for Windows 32 and 64 bit. This driver package will install all drivers for all LaunchPads.
Unzip and double click 'Install Energia Drivers for Windows 32 bit' for Windows 32 bit or 'Install Energia Drivers for Windows 64 bit' for Windows 64 bit.
Follow the installer instructions.
Connect your CC3200 LaunchPad to your PC. The CC3200 will be automatically recognized.
Windows® 7 (32-bit or 64-bit)
Windows® 8.1 (32-bit or 64-bit)
Windows® 10 (32-bit or 64-bit)
2. Peripheral Devices
USB 2.0 interface.
Installing the virtual COM port driver
ATTENTION: Do not connect the device to a PC before installing the virtual COM port driver.
1. Extract the downloaded file 'USB_CDC_Driver_TH-D74_V100.zip' into a designated folder. In the designated folder, a folder labeled 'USB_CDC_Driver_TH-D74_V100' will be created.
In the folder labeled 'USB_CDC_Driver_TH-D74_V100', double click the 'dpinst.exe' in the folder 'x86' with 32-bit OS, or the 'dpinst.exe' in the folder 'x64' with 64-bit OS.
After a few moments, the following window is displayed.
Click [Next>].
2. The following window is displayed, and the driver installation will begin.
Wait until the installation is completed.
Dpinst.exe 64 Bit Windows 8 Itunes Download
3. After a few moments, the following window is displayed.
Click [Finish] to complete installation and exit.
Connecting the device to a PC
Turn the transceiver power ON, then connect it to a PC via a Micro-USB cable for the transceiver. The PC will detect new hardware.
The installation of the device driver software will start automatically.
If a reboot request appears, please reboot the PC.
Confirming the COM port number
Open the 'Device Manager' to confirm which COM port number is assigned for connection with the TH-D74A/E.
(Confirm the COM port number after turning on the transceiver and connecting the transceiver to the PC using a Micro-USB cable.)
For Windows® 7
1. Click the Windows® [Start] button.
2. Right-click [Computer], then click [Properties].
3. Click [Device Manager] in the displayed window.
4. [Device Manager] window will appear.
For Windows® 8.1 and Windows® 10
1. Right-click the Windows® [Start] button.
2. Click [Device Manager] in the displayed window.
3. [Device Manager] window will appear.
Click 'Ports (COM & LPT)' to extend it, then you can find 'TH-D74 (COMxx)'. The 'COMxx' number is different depending on your PC.
In the above example, 'TH-D74 (COM3)' is listed. This means that COM3 is assigned for the connection with the TH-D74A/E.
Select this port number in the configurations for communication in the software you are using.
Dpinst.exe 64 Bit Windows 8 Free Download
If you agree with the details listed above, click the following link to download the virtual COM port driver installation program.
Dpinst.exe 64 Bit Windows 8 1 download free. full Version
Update History
First Release (September 16, 2016)
Windows®, and Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries.
Follow the instructions on this page for important jumper settings and firmware upgrade instructions.
Do not connect your CC3200 LaunchPad to your PC. If you already plugged it into your PC then unplug it before proceeding to step 2.
Download the CC3200 Drivers for Windows: CC3200 LaunchPad CDC drivers zip file for Windows 32 and 64 bit. This driver package will install all drivers for all LaunchPads.
Unzip and double click 'Install Energia Drivers for Windows 32 bit' for Windows 32 bit or 'Install Energia Drivers for Windows 64 bit' for Windows 64 bit.
Follow the installer instructions.
Connect your CC3200 LaunchPad to your PC. The CC3200 will be automatically recognized.
For Windows 8 and 10 users you may need to disable your signed driver feature, follow this guide: https://learn.sparkfun.com/tutorials/disabling-driver-signature-on-windows-8
Troubleshooting (Not seeing your Serial Port in Energia? Driver not correctly installed?)
Make sure jumpers are connected on LaunchPad and you get a green or red power LED turning on when connected via USB
Restart Energia
Restart computer (shouldn't be required but may help)
Right click and run DPinst.exe or DPinst64.exe as administrator
